2020. 1. 21. 17:08ㆍ카테고리 없음
Free Virtual Serial Ports Emulator is a program developed by Eterlogic Software. The most used version is 0.865, with over 98% of all installations currently using this version. Www.eterlogic.com: Free Virtual Serial Ports Emulator (VSPE) 0.938 Description. Create, debug or test applications that use serial ports. [ Read More ] Related Downloads. Expert Debugger Debugger for PHP. You can run scripts in step-by-step mode and to trace values.
After a complete reinstall of FSX and all my add-ons and hardware I cannot get the VSPE to work with FSUIP to get the MRInsight M-Panel loaded. The panel will load via the start menu or shortcut ok so the problem isn't there. After checking and rechecking my shortcut and.ini entries without finding anything I'm hoping to get the fix here.
Prior to the reinstall, and after Pete corrected my syntax in the VSPE shortcut it worked perfectly. Current settings: VPSE Pair.COM5 COM6 (Also tried COM1 COM2 ) FSUIPC4.ini. VRInsight 1=COM5,COM6 Programs Run1=READY,CLOSE,C: Program Files(x86) SerialFP2 SerialFP2.exe Note that the new driver software uses Program Files(x86) as the main directory instead of VRInsight VSPE shortcut. 'C: Program Files (x86) Eterlogic.com Virtual Serial Ports Emulator VSPEmulator.exe' -minimize -hidesplash C: ComPair56.vspe I have double-checked spelling, and directory trees and cannot find any errors FSUIPC Log.
Please please please review the documentation I provided, which is replete with diagrams explaining all this! OK Once more unto the breach, dear friends, once more; Or close the COM up with our SERIALFP2 Pete Your responses seem to imply that I am either not too bright or too lazy to do my homework. It is true that I am no longer a fiery youth but I have an earned doctorate in mathematics, taught in a university for 25 years and prior to that was a USAF combat crew navigator. Believe me, I have done a lot of studying and would much rather learn something than request help. After trying to follow your documentation my last attempts probably look random. According to Device Manager, the SerialFP2 is using COM8. My first setting was 1=COM8,COM5.didn't work.
Tried 1=COM8,COM6.didn't work. Ditto when I created a pair COM1COM2 If the device is on COM8, then COM8 must be the first port. You are probably not telling SerialFP2 to search again.
Also do check that VSPE is actually saying that the pair you are asking it to create are 'Ok'. I'm afraid I cannot support either VSPE or SerialFP2 as both are by others and outside my control. All I can advise and document are what works for me and others. On your subsequent post.
Just beware of the Hamlib TS480 library for PTT, it has a race condition where the order of the replies from the DUO can cause lockups. Stick to using serial port PTT and the problem goes away. We need some brave soul to write an official Hamlib library entry for the DUO, without the bugs of the TS480 version.
I send the output of VRX1 to VAC and then point the input of all the various programs at that VAC stream. I avoid the serial port contention issue by only using one program at a time to send CAT commands, but if you want to have multiple programs able to control SW2 and/or DUO at the same time, you will need to handle port contention (or use separate virtual ports) as recommended. On 14:41, Bob W0EG wrote: Thanks. I see now that setting FLDigi sound card Port Audio to 'Line (FDM-DUP Audio v1.04)' gets the audio stream from the stand alone DUO. The DUO must be started first, then open FLDigi.
I did need to increase the gain a bit on the DUO to get equivalent levels as compared to my TS-590S. However, I should have been more specific in my question. I was referring to using the FDM SW2 software and sending its output to the decoders. I read this app note from Elad: ELAD Application Notes AN-‐002 rev 1.0 Setting FDM-‐SW2 with external programs: CW Skimmer, FLDI This is where they say to use the recommended port emulator and set the second and the receivers in SW2 to different ports. I have not yet tried transmitting PSK on the DUO but that will be be my next step and I will need to enable CAT.
Virtual Serial Port Emulator Software
I'll try looking for a RigCat file for the DUO like the one that works so well in FLDigi with the TS590S.